Sheet Metal

Schedule a Demo

This field is for validation purposes and should be left unchanged.

Work Email(Required)

Company(Required)

Industry(Required)

First Name(Required)

Last Name(Required)

State / Province(Required)

Country(Required)

Autodesk Agent of Record(Required)

CAPTCHA

By submitting this form, you agree to the collection and processing of your personal data by Eagle Point Software. We value your privacy and will only use your information to provide the services you request, as outlined in our Privacy Policy. From time to time, we may send updates about our products and services, but you will always have the ability to opt out of these communications.

Learning Path Courses:

Bending and Folding
Bending and Folding Course Introduction
In this course, you will learn how to modify your existing Sheet Metal part by adding rolls, hems, folds, and bends.
Sheet Metal parts often need to connect faces, roll over existing edges, or fold over un-bent faces.

Course Objectives
The material presented in this course will teach you:
- Contour Roll
- Hems
- Folds
- Adding Bends
- Unfold and Refold
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 25 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Seams and Corners
Seams and Corners Course Introduction
In this course, you will learn how to modify Sheet Metal parts by applying rounds, chamfer, and corner relief.
Sheet Metal parts often have flanges on adjacent edges creating the need for corner relief cuts.

Course Objectives
The material presented in this course will teach you:
- Cutting Sheet Metal
- Corner Chamfer and Round
- Editing Corner Relief
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 15 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Conversion and Direct Editing
Conversion and Direct Editing Course Introduction
In this course, you will learn how to Convert parts into Sheet Metal when they weren't designed using Sheet Metal tools and use Direct Editing tools on Sheet Metal parts.

Course Objectives
The material presented in this course will teach you:
- Converting Sheet Metal Parts
- Direct Editing
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 10 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Punching
Punching Course Introduction
In this course, you will learn how to create and place Sheet Metal Punches.
Sheet Metal punch tools are iFeatures with extra attributes that cut simple or complex holes in the face of your part, including across bends.

Course Objectives
The material presented in this course will teach you:
- Creating Punch iFeature
- Inserting Punch Tool
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 10 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Assemblies
Assemblies Course Introduction
In this course, you will learn how to work with Sheet Metal assemblies, use Multibody modeling practices, and add PEM Fasteners to Sheet Metal.

Course Objectives
The material presented in this course will teach you:
- Adding PEM Fasteners to Sheet Metal
- Multibody Parts
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 10 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Flat Pattern
Flat Pattern Course Introduction
In this course, you will learn how to flatten a folded model and edit it for fabrication.
Once your Sheet Metal design is completed, it is necessary to convert the folded model to a flat pattern for manufacturing purposes.

Course Objectives
The material presented in this course will teach you:
- Creating a Flat Pattern
- Flat Pattern Feature
- Specifying the A-Side of a Sheet Metal Part
- Punch Representation
- Exporting Flat Patterns
- Sheet Metal Unwrap
- Common Commands Between Part and Sheet Metal
- Compute Errors
- Cosmetic Bend Lines
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 45 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Sheet Metal Documentation
Sheet Metal Documentation Course Introduction
In this course, you will learn how to Place and Annotate Sheet Metal parts in drawings.
Creating a drawing for a Sheet Metal part is a similar process for other models but incorporates additional tools to support Sheet Metal.

Course Objectives
The material presented in this course will teach you:
- Placing Views
- Annotations
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
- Drawing Essentials
Approximate Duration: 10 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Rules and Standards
Rules and Standards Course Introduction
In this course, you will learn how to work with Sheet Metal part Styles and Standards.
The Autodesk Sheet Metal environment is specifically built for thin, uniform-thickness parts.
The purpose-built sheet metal environment has tools designed for thin parts that can be flattened.

Course Objectives
The material presented in this course will teach you:
- Sheet Metal Overview
- Sheet Metal Styles
- Understanding Sheet Metal Bend Tables
- Sheet Metal Multi-Body Unique Rules
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 20 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.
Faces and Flanges
Faces and Flanges Course Introduction
In this course, you will learn how to create Faces and Flanges in a Sheet Metal part file.
When building Sheet Metal components, you will be required to use specific commands in the environment.
Fundamentally, the Face and Flange commands will be most frequently used to create Sheet Metal parts.

Course Objectives
The material presented in this course will teach you:
- Creating Faces
- Creating Double Bends
- Single Sheet Metal Flanges
- Sheet Metal Contour Flange
- Sheet Metal Lofted Flange
Course Prerequisites
To participate in this training course, you should have a basic understanding of the following:
- Part Modeling Essentials
Approximate Duration: 25 Minutes
Tips:
- Turn off your phone, and close your email, text, and social media apps.
- Plug headphones or earbuds to your computer.
- Go Full Screen when watching videos.